Using marijuana as a treatment and potential cure for cancer cells has been increasing dramatically over the past few years.
For years now there have many researches that have categorically proven the anti-tumoral impacts of the marijuana plant. Cannabinoids (basically any sort of compounds that include cannabinol and the energetic constituents of cannabis) will trigger cannabinoid receptors in the body. Endocannabinoids are naturally produced by the human body, these play a very important part in a number of processes within the physical body to provide a healthy atmosphere.
The 2 approved therapies for cancer cells are radiation and chemotherapy but what some people do not realize is that they do have other options. It is so important to give everybody a chance to understand what other options exist. We all have a right to research and find alternative treatments and thankfully more and more people are doing this. With some personal research and knowing your own body you will be able to find a treatment that is best suited to you.
A number of people have used cannabis oil treatment to assist manage their cancer cells and there are many amazing stories. Read Here. If you have done your own research and have come to the conclusion that cannabis oil is a treatment you could benefit from, you can start here with a cannabis oil recipe. Rick Simpson’s Hemp Oil is a very popular option, he is a medical marijuana activist who has been educating people about the healing potentials of Hemp Oil medications for many years.
His was inspired by his own experience when he cured himself of a metastatic skin cancer in 2003. Below is a video on how to make Rick Simpson’s Medicinal Hemp Oil Safely. IMPORTANT INFO: Please be VERY careful when boiling solvent off, the flames are extremely flammable. AVOID smoking, sparks, stove-tops and red hot heating elements. Set up a fan to blow fumes away and ensure that for the whole process it is set up in a well-ventilated area.
Please remember to always consult a professional and do your research before you do anything to make sure you fully understand how everything works.
This information has been ignored for way too long. We urge you all to get this information out there so it’s finally common knowledge. Please hit one of the share buttons below to help raise more awareness. Thanks for reading and we hope to see you again soon!
How To Make Concentrated Cannabis Oil
The information contained in this post is provided for informational purposes only. 420 Magazine makes every effort to present accurate and reliable information, however 420 Magazine does not represent, warrant, or certify any information displayed, nor does it guarantee the safety, accuracy, completeness, efficacy, or timeliness of such information. It is your responsibility to evaluate text, content, opinions, statements, suggestions, strategies, tactics, or other information made available herein. Use of such information is voluntary, and reliance on it should only be undertaken by qualified individuals. Under no circumstances will 420 Magazine be liable for any damage caused by reliance upon information contained herein. Any reliance upon any information is at your own risk. 420 Magazine requires you to warrant and represent that you are at least eighteen years of age (twenty one years of age in some jurisdictions) and have the legal capacity to use this Website and Forums. 420 Magazine makes no representation or warranty that the content published in this post/forum complies with either Federal or the local laws of your jurisdiction. You are solely responsible for knowing and understanding laws concerning content legality. If you are unable to make the representations and warranties contained herein, please leave the website immediately.
Making Concentrated Cannabis Oil Extract:
Prior to making your first batch of concentrated cannabis oil, please read through all instructions thoroughly and completely. Please note that 420 Magazine does not condone the manufacture of Butane Hash Oil, BHO, the more hazardous method of Hash Oil manufacture. The extraction and concentration of Cannabis oil as described in the following process should only be attempted by qualified individuals. An overview of the safety issues is as follows:
- The process should only be performed with a clear head
- The use of flammables around open flame should only be performed outdoors
- Personal Protective Equipment (PPI) should be utilized as appropriate
- Ensure boil off of the solvent as per the instructions to avoid incomplete removal of alcohol
- Once complete, do not immediately seal the oil in an airtight environment
- Do not seal the solvent-wet spent Cannabis in garbage bags without first allowing the solvent to fully evaporate
There are different methods of extracting oils from cannabis and making a concentrate. The method of choice for this tutorial is Quick-Wash Ethanol, aka QWET. This is a popular used method using a food grade solvent/carrier to extract the oils. This tutorial will allow for a person with a serious illness like cancer to make their own medicine. We will use layman’s terms to keep things simple. Mentioning food grade solvents/carriers will be redundant as safety is a main concern. Making cannabis concentrate is something most people can accomplish themselves, and if using high quality bud/flowers results in potent medicine. After a couple of times making the oil you will not only see how easy it is to make, but will start to pick up speed and time in the process while feeling confident in your finished product.
Keep in mind, while food grade solvents/carriers may be safe for ingestion, they are still very flammable and caution should be used! Make sure you do the quick-wash and cook down outside in a well-ventilated area (for example, a covered patio). If there is a wind/breeze find out what direction it is coming from and have the wind to your back. Also use a small fan and have that positioned so it blows in the same direction as the wind/breeze. Doing so will also keep the solvent/carrier vapors blowing away from you. Do not smoke or barbecue while making your concentrated oil. Make sure the patio is swept and washed down so dirt and debris is not blown into your bud/flowers during your quick-wash or while you’re cooking off your solvent. Doing a dry-run practicing your layout, and a mock quick-wash before your first attempt is highly recommended to build your confidence and lesson your chances of making mistakes.
Materials Needed to Make the Concentrated Cannabis Oil:
The materials listed were used to make the concentrated cannabis oil for this tutorial: Rice cooker, portable induction cook-top, 2 quart sauce pan induction use approved, mixing pitcher, mixing stick, (3-4) different size strainers, (3-4) funnels, (3-4) collectors to catch the carrier as it passes through the filters, (2) thermometers, eye dropper, (2) hot pads, measuring cup, high grade bud/flowers, and Everclear 190 proof / 95% proof by volume grain alcohol. The amount of Everclear used varies. For one ounce of bud/flowers one 750ml bottle should be enough, however, getting two would be a smart choice. Whatever unused alcohol is left over can be used at another time. Most equipment in this tutorial is common and can be found around the house.
Setting Up Your Equipment:
Start off by setting up your rice cooker, mixing pitcher, funnels, filters, strainers, containers, hot pads etc. Put these on a solid table/platform or anything you can use to support the rice cooker and your other equipment solidly. Make sure you position your fan correctly. Have the fan blow air in a slightly “up” position, not blowing down into the rice cooker, while making sure the air is directed towards the back side of your rice cooking apparatus and between your wall plug. This keeps the vapors away from the outlets. If you’re using an extension cord make sure that it is a heavier gauge than the cord on your rice cooking apparatus and keep the fan positioned between the extension cord and rice cooker. Do not plug in your rice cooker until you have completed your quick-wash and it has been filtered and poured into the rice cooker.
Rice Cooker Disclaimer:
Please keep in mind that certain rice cookers may have a safety feature that prevents the unit from operating in the event it is tipped (anti-tip kill switch). You will need to tip the rice cooker when you are swirling the oil in the final stages of cook down, so in order for this to work you will need a rice cooker, or alternative, that doesn’t turn off when tipped. For this reason we recommend only using the Cuisinart CFO-3SS fondue set which lacks this feature and would be a viable option should you choose to go that route.
Preparations Before the Concentrated Oil is Extracted:
This is my preferred method for a faster decarboxylation process. I use a portable induction cook-top, an induction approved two quart pot, and a heavy stainless steel measuring cup so it won’t float on the surface. I modified the measuring cup by drilling a 3/16” hole in the side of the measuring cup opposite of the handle about 1/8” from the top and shortened the handle with a 4 inch hand grinder so it would fit in the pot. Then I used some wire I had, stripped off the shielding a few inches on each end, threaded it through the hole and twisted the wire until it was secured. Then twisted the other end of the wire around the stubby handle.
I used an organic olive oil, found in specialty markets like Trader Joes or health stores like Whole Foods. Place your heavy measuring cup in the empty sauce pan, and pour the light olive oil about 1/8″ from the hole you drilled into the side. Have some paper towels handy, remove the cup and wipe off any excess oil and wash with dish soap and warm/hot water and place outside with your other equipment. I also insert a stainless steel washer in the center of the sauce pan. This is done so when removing the cup after the decarboxylation is completed it is much easier to remove and isn’t suctioned to the bottom of the sauce pan. The olive oil is heated to 180 degrees and awaits the heavy measuring cup after the cook down of the concentrate is complete. Using this decarboxylation method requires a laser type handheld thermometer and a digital one as a cross reference. Others will suffice like a meat probe, but as a rule have something accurate to cross reference. Ensure that the temperature of the oil in the pan is at 180 degrees before starting the quick-wash process. 180 degrees will be the starting temperature of the decarboxylation process but will finish around 250 degrees (NOT to exceed 250 degrees).
Preparing For a Quick–wash Using Food-grade Solvents/Carriers:
The purpose of doing a quick-wash is to pull out most of the chlorophyll and plant alkaloids, as well as the plant waxes and vegetable oil, though small amounts will still be retained. It’s not an absolute oil for the connoisseur, but for medical uses it is an excellent choice. By freezing your bud/flowers and getting your food grade alcohol/carrier down to 0 degrees you have about 6-8 minutes to complete your wash before pulling out previously mentioned bud/flower waste, hence “quick-wash”. Place your solvent/carrier and buds/flowers in the freezer set at 0 degrees for 24 hours. Do not freeze buds/flowers that are wet. An easy test is take a stem and bend it, if it snaps instead of bending its ready. A proper cure should have the same result. Properly drying and freezing the buds will keep excess moisture from the process. To remove any doubt, lay your bud on a cookie sheet covered with a couple of paper towels on top of the buds and air dry for a couple of hours even if the stem snaps.
Begin Making Concentrated Cannabis Oil:
Now let’s begin the quick-wash procedure. Get your mixing pitcher and your stirring tool ready, set up your funnels on top of your catch containers and line with two filters for each funnel. Remember the trick to a quick-wash is to go as fast as you can, so the more funnels and catch containers you have the easier and faster it is. An example is as follows: if you mixed up your first batch of bud/flower during your quick-wash and pour into your funnels with your filters inserted they start draining into your collector containers. When they fill up they take time to drain. By having more, you can start your second wash and when complete you have more empty collectors with funnels and filters ready without the need to wait for the ones you already filled to drain down. Once you master the quick-wash process you will start achieving a higher quality extract. Start off using one ounce of bud/flower as this amount is much easier to do when learning. You can increase the amount you make once you become familiar with the process using this “one ounce” amount. Also you’ll be able to more accurately gauge the amount of Everclear needed per ounce.
Remove your frozen bud/flowers, food grade alcohol/ethanol/carrier from the freezer and move to your work-site. Place your bud/flowers into the mixing pitcher. Pour your carrier over the cannabis just enough to lightly wet it and pack it down with your mixing tool. Then add more carrier to a level about an inch over your cannabis and quickly squash the bud/flowers while mixing.
Be sure not use a lot of force or work too quickly in order to prevent slopping around. Remove your mixing tool, grab a strainer, and position over a funnel that is lined with a filter. Pour the contents of your mixing pitcher through the strainer into your filtered funnels. If any cannabis falls into the strainer after you finished draining the mix pitcher, dump the cannabis back into your mixing pitcher. If you filled one of the funnels about one inch from the top, stop, and move to another filtered funnel set up and continue pouring. Do not try to get it all out as this slows down the quick-wash process.
Set the mixing pitcher down, pour more carrier over the cannabis (same amount as before, one inch over the top of the cannabis). Repeat the same procedure as the first wash. Drain the pitcher where you left off filling your funnels. Once drained a second time, pour about a quarter cup of the carrier back into the mixing pitcher and do a short final quick-rinse. Pour the remainder through the strainer into the emptiest filter. If that one is filled to 1” from the top move to another one. Take the cannabis in the mixing pitcher and pour/scrape into the biggest strainer. Then make a fist and push down on the cannabis while holding the strainer over a filtered funnel and press down. Keep doing this until nothing more comes out. Practice and experience will improve efficiency.
Allow the used Cannabis to air dry, then discard the cannabis in a trash bag for disposal. Make sure you tie the bag securely to keep the odor level down. Set aside the mixing pitcher and mixing tool. When the first set of filtered funnels have drained down grab the top corners and pull to the center and keep doing this until the filter is bunched, then gently twist and fold over so when you squeeze them out loose cannabis material does not fall into the drain containers. Keep repeating this until all the filters have been removed and have squeezed out any leftover carrier. Remove all funnels and set them out of the way. Now take a small, fine meshed strainer and hold over the rice cooker. Grab a container with the carrier in it and pour into the fine mesh strainer, as this will pick up any debris that might have fallen in and catch it. Once all the containers have been strained and poured into the rice cooker, set them out of the way of your work area.
Plug in your rice cooker and turn it to “high”. Now is a good time to quickly pick up your dirty equipment and move it to an area for later cleaning. Also, while the rice cooker is warming up, check to see if your sauce pan inside is still around 180 degrees. This should all be ready to go when the oil is done cooking down and poured into the measuring cup. At this point it will go right into the two quart sauce pan on your induction cook top.
The rice cooker should be heating up and you should be able to see some movement as the solvent starts to cook off. Remember to stand with the breeze/fan to your back so it blows the vapors away from you. Keep observing – you will start to see more rapid movement as the carrier cooks off. Some rice cookers have a high/low switch that kicks down automatically when it gets down to a half cup mark or so. If so, it may not kick back up to “high” until the built in thermostat cools down enough. Not a deal breaker, just takes more time.
Put on cooking mitts and ensure all bare skin is covered. When the carrier gets down to about a cup, start tilting the rice cooker a little – like you’re panning for gold (swirling the carrier/oil in a easy circular motion). Be careful:swishing too vigorously may make the oil splatter. As it gets down to about a half cup flip the switch on the rice cooker to low so you don’t burn the oil.
If the oil starts smoking, grab a hot pad and carefully lift out the inner bowl with the oil in it. Cool slightly before replacing back into the cooker (which has been switched to the low position). When the solvent doesn’t bubble as much (your still slowly swishing and keeping the rice cooker tilted) grab the hot pad and a stainless steel measuring cup, (for one ounce a 1/3 cup measuring size is perfect). Lift out the inner bowl. Hold the measuring cup in one hand, the inner bowl in the other hand, and carefully pour the contents of the bowl into the measuring cup.
Get as much as you can into the measuring cup, then set the inner bowl back into the rice cooker (still set on low). Then, take your measuring cup and proceed to your sauce pan with the organic olive oil inside warmed to 180 degrees. Set the measuring cup inside on top of the washer.
You’re done cooking down your concentrated cannabis oil, and the decarboxylation process has begun. Quickly go outside with a hot pad in one hand, and a small silicone spatula in the other, then scrape out as much of the oil that is still warm onto the spatula. Then, using a cuticle pusher scrape off the oil from the spatula onto the inside lip of the measuring cup. It will flow down to the rest of the oil and join the decarboxylation process. Use caution as the oil may still be hot.
Cannabis produces phytocannabinoids in a carboxylic acid form that are not orally active at least at the CB-1 receptor sites, because they don’t readily pass the blood brain barrier in their polar form. To enable them to pass the blood brain barrier, they must first be decarboxylated, to remove the COOH carboxyl group of atoms, which exits in the form of H20 and CO2.
Decarboxylation occurs naturally with time and temperature, as a function of drying, but we can shorten the amount of time required considerably by adding more heat. The more heat, the faster it occurs, within reasonable ranges, and in fact occurs spontaneously when the material is burned or vaporized. There is another mechanism at play however, which suggests that we need to control the decarboxylation temperatures carefully. When we heat cannabis to convert the THCA and CBDA into THC and CBD, we are also converting THC to CBN at a faster rate. At about 70% decarboxylation, we actually start converting THC to CBN at a faster rate than we are converting THCA to THC, after about 70% decarboxylation, the levels of THC actually start to fall sharply. That of course means that the CBN also begins to rise and the medication is becoming more sedative.
Once the measuring cup with concentrated oil is placed into the sauce pan, the temperature should be 180 degrees. Observe how the concentrated oil reacts. If it starts to bubble immediately it’s burning off any excess carrier. If it doesn’t start to bubble, turn it up to 190 degrees. Pay attention and do not leave the decarboxylation process. When it starts to bubble and the bubbles are big and more defined the decarboxylation process has begun.
When the bubbles start tapering down in size turn the temperature up another 10 degrees. Keep bumping up the temperature by 10 degrees until the 250 degree mark has been reached. Depending on the ambient temperature inside, you might not achieve 250 degrees if no bubbles are present and there is no movement in the measuring cup. At which point, the decarboxylation process is complete.
NEVER EXCEED 250 degrees! Do not touch the sauce pan when removing the measuring cup as it is hot. Use hot mitts to remove the measuring cup, Using caution not to tilt the measuring cup and accidentally spill your concentrate out. I did not use hot mitts because they were over-sized and blocked the view of the oil in this tutorial. However, I would always otherwise do so to prevent any danger of burning my hands. Think safety at all times.
Remove the measuring cup and place on a couple of cotton terry cloth towels to absorb some of the oil off the bottom of the cup. Sit the measuring cup on the counter, then take the terry-cloth towels, fold in half, and set the measuring cup down using the edge of the hot pad to angle the measuring cup. The cannabis concentrated oil is now ready to put in a oral syringe/storage container.
While the oil is still hot from the decarboxylation and now tilted on the terry cloth towels, it is the time to suck it up with a oral syringe. Before you start, quickly pull back on the syringe plunger as this frees up the gaskets so when you start pulling up the oil it is a much smoother process. As you pull up the oil move the syringe slightly from side to side, making sure the tip is in the oil and very slightly angled.
Towards the bottom of the measuring cup, as the oil gets low, you might get a mixture of oil and air creating little bubbles. I set the oral syringe down with the tip facing up on the counter with no cap overnight. If the air bubbles in the oral syringe have not dissipated I take a hair dryer on low and keep the air on the bubbles until they dissipate completely. You’re not going to be able to get it all in the syringe. That’s fine, as you can leave it in the measuring cup to cool. Later, you can use your cuticle pusher to scrape off doses, make oilers, add some coconut oil and make a really potent salve for cuts, burns, skin cancer and a plethora of other topical applications.
Storing Concentrated Cannabis Oil:
Stored correctly, many have stated that concentrated cannabis oil should last up to 5 years. I’ve never stored the concentrate for that long so I cannot verify this personally. I keep mine in oral syringes with the cap on tight and place those in a container that has been vacuumed sealed. A safe is an excellent place that is cool, dark and secure. The syringes may also be placed in a dark container and refrigerated. Do not freeze!
Optional Decarboxylation Process:
This decarboxylation process is done using a plate warmer that has been plugged in and preheated before you make your concentrated oil. The decarboxylation process has taken me anywhere from 30 minutes (ambient temperature was 95 degrees) to over 11 hours using a plate warmer (ambient temperature was 60 degrees inside). On average, I would say the plate warmer has typically taken me three to five hours. Remember, the process isn’t done until the oil has completely stopped moving with NO BUBBLES.
Keep in mind that when you first put your measuring cup on the plate warmer, and the oil heats up, the initial bubbling starts burning off the alcohol first when the temperature of the concentrated oil gets around 180 degrees. Then, it settles down and the bubbles become more defined in appearance. As in the earlier method, the same applies using the food warmer. The bubbles start off bigger and later get smaller. When there are no bubbles and the concentrated oil stops moving it is ready to store in an oral syringe/container. It should be noted, you can choose how long you want the decarboxylation process to go before you stop it. When the bubbles are large and start to get smaller the peak THC level has been reached. As they get smaller, the CBD/CBN start to develop and when decarboxylated to the point of no bubbling or movement it is completely done. Having no more bubbles or movement is my choice for full medical value cannabis concentrated oil.
If you decide to stop the decarboxylation process at peak THC, then you need to purge any alcohol left in the concentrate. For our purposes, just unplug the plate warmer, set up a small fan turned on low, and have the breeze flow over the cup for 20-30 minutes. The heat from the plate warmer keeps the oil warm enough after it is unplugged for the grain alcohol to dissipate. Any trace elements left over should be minute and safe to consume. Again, NEVER GO OVER 250 degrees using any heat platform for your decarboxylation process! Using a food warmer for the decarboxylation process does not need the attention of the double boiler method. Do a walk by every 30 minutes to check the size of the bubbles. When they get real small check every 15 minutes until movement has stopped completely.
re: How To Make Concentrated Cannabis Oil
Material List for Making Concentrated Cannabis Oil Extract
Note: We are including this information for example purposes, and including both a “budget” and an “upgraded” list of materials. While either materials list will work to produce high quality medicine, the quantity and quality may be slightly improved depending on the materials used. Be sure that if you substitute that you will be able to provide the same results. Please read all of the manufacturer’s operating instructions and safety precautions before using. 420 Magazine assumes no responsibility.
Cannabis Oil Medicine Dosing Tutorial
This OPINION is a guide for people who have run out of all traditional medical options for cancer or other serious illness, have heard of concentrated cannabis oil and its healing properties, and want to treat themselves or a loved one in a safe manner. These opinions are expressed for humanitarian reasons only.
The healing process can be overwhelming when people become seriously ill. Consider having a family member or friend help you with this process, as they may be more capable of focusing on the task at hand without the added stress and anxiety that comes with being ill. Your choice is your own regarding what brands, items and materials you choose. Once you start healing, you may look back and think “that was easy” and pay it forward to help others.
What you need to start with:
• Concentrated Cannabis Oil (aka Hash Oil/Honey Oil/RSO-Rick Simpsons Oil). Other oils are not applicable for tacking properly. You alone are responsible to know the potency and quality of the concentrated cannabis oil you’re using for treatment.
• Oral syringes with caps for storage – for ease of application (applied to finger). They are marked with indicators that are used as reference points to assist with increasing dosage sizes as needed.
• A stainless steel cuticle pusher that is flat on both ends. It is essential for removing a dose that’s too large from your finger, and has many other uses in the making of concentrated cannabis oil.
• A plate warmer/coffee mug warmer can be used when adding thinners such as organic grape seed or coconut oil, or the blending and mixing of other strains of concentrated cannabis oil that may need adjustment. A hair dryer with a low heat and fan setting is recommended to warm up the concentrated oil on your index finger before application (when the concentrate is cold). Rinsing your mouth out with ice water gets your gums cold, and the concentrated oil adheres easier to the gums if they are colder than the oil. Pay attention when it’s warm, as the oil comes out much faster.
• If making your own cannabis concentrate use only the safest legal solvent to make the cannabis concentrated oil. Food grade solvents/carriers meet these safety precautions and are safe for consumption (search the internet for food grade alcohol/ethanol solvents). These may or may not be legal in your state, and your acquisition of these are solely your decision. Also, please keep in mind that food grade solvents/carriers, while safe for consumption, are still very flammable! Caution, safety and common sense should be used.
• While there are many informative videos and articles available, most have been edited so they can be more easily read. Unfortunately, some of the edited information is vague and misleading. Confusion is why cannabis is a Class 1 drug. If these opinions are followed correctly your journey to heal will begin in a safe non-euphoria environment while continuing your lifestyle. For those who are bed ridden or weak, this may improve your health. Ideally, you will be up and about living normal life again while healing. If it is too late for treatment your quality of life may be vastly improved with minimal pain, so that you can pass in a humane way instead of feeling lethargic and drugged.
• Some of the best advice you can receive is have a positive outlook. Do not fear the unknown. Take charge, have patience, don’t second guess what is happening, and let the concentrated cannabis oil do its work. If you have an issue, correct it and continue healing. Read, read and read again.
Take a portion about the size of a 1/4 grain of short rice and apply it on one of your index fingers. Spread the oil on your index finger, as this takes the drop shape and flattens it on your finger (which is much easier to control while applying on the gums). A cuticle pusher is an excellent tool for this.
Place your index finger between your gum and cheek with the concentrate towards your gum. Then hold against the gum without moving for as long as it takes to tack/stick/adhere to your gums. Then, slightly moving your finger in a circular or side to side fashion, rub until you feel it grab to your gum. Do not proceed until it adheres to the gums. Remove your finger and inspect where the rest of the concentrate has moved. Apply right next to your first tacky spot, and keep repeating using the same method. Do this until all the oil is gone. A light film will be left on your finger; warmed with a hair dryer, it can be used as a topical application for cuts, bruises, pimples, burns, etc. The illustration below is an example of where to apply tacks to your bottom gum. Keep in mind, this is just an example, and any area on your bottom gum can be used. If you use dentures on your bottom row of teeth, remove them and tack per instructions before putting the dentures back in.
Note: If using a daytime oil and a nighttime oil keep those tack spots separate. Keep your daytime tacks on one side of your bottom gum and your nighttime on the other side. Some people prefer a more “uplifting” strain for their daytime oil, and a more sedative oil for nighttime usage. As an example: if you put your nighttime tack on your daytime tack you will be UP.
Concentrated Cannabis Oil is a powerful, potent medicine and should be respected as such. Always start off using small amounts, then build your way up to the amount required to kill cancer (1 gram total per day). It should take approximately 5 weeks to achieve 1 gram per day. As your dose amounts increase, be cautious and divide that amount up into small doses until gone. Applying more frequently during the course of a day keeps the medication constant and level in your system, and eliminates high-low spikes. Taking a little extra time for correct application is the smart choice for safety. If you want to use for preventive maintenance or wellness use an amount the size of one grain of rice per day.
Tips on using Concentrated Cannabis Oil:
It takes a time for the oil to get fully regulated in your system. Be patient, as everyone’s system and makeup is slightly different. It typically takes 3-5 days on average. This method of tacking, if done properly, should provide no euphoric “high”. Many think it is not working and start taking more than advised, resulting in feelings of euphoria at unexpected times. Once you start your regiment on concentrated oil you will begin to notice small changes. Before long you should feel healthier and a greater sense of wellness.
Be sure to start your tacking when at the beginning of your day. Eat breakfast first, brush your teeth, rinse your mouth out, then apply your first tack of the day. Always take your medication after you eat, and follow the same procedure of cleaning and rinsing your mouth out before tacking. This prevents the concentrate from getting on food particles stuck in your teeth and washing down to your stomach, possibly resulting in an unexpected euphoria.
When building up your regimen with concentrated cannabis oil, increase how many times you take your medication per day. Let’s say you worked up to a grain of rice, and now you want to increase to a grain and half. Your regimen for a grain of rice was two times a day. You’ll now want to increase the applications to three times a day. If you increase the amount to two grains of rice you would increase your applications to four times a day, etc. Once you achieve a gram of concentrated oil a day, you would optimally apply eight to ten times throughout the day. Using this example ensures you maintain control, and allows your body to be regulated without having low or high spikes. The process should become easier with experience.
Pay attention to how your body feels. If you feel nauseous, in most cases you need to simply eat a snack and drink some water. It should go away quickly. If left untreated, anxiety may set in. A simple snack or some water should help you feel better. If you are feeling a little off, you can add a tiny little booster tack. Boosters do not change your tacking regimen or the amount of your medication. Boosters shouldn’t be needed often, but are worth considering in cases of physical exertion or when you feel a little more tired than usual. A good rule of thumb is to first eat and drink. If that does not work take a booster application.
When using concentrated cannabis oil you must stay hydrated with water. Even if you’re not doing anything, your body’s metabolism is raised using daytime oil. Always keep water around you. A good reminder is when you’re done urinating, drink water immediately after.
Pay close attention when using Concentrated Cannabis Oil in combination with prescribed blood pressure, pain and sleeping medications. Always stay hydrated, and be sure to maintain a healthy diet.
THERE ARE NO SUBSTITUTES FOR SAFETY AND READING INSTRUCTIONS CORRECTLY!
NOTE: This information is provided for educational purposes only. We bear no responsibility if this information is misused.
Many thanks to 420 Magazine for allowing the avenue for awareness!
Written by Motoco 1982
Edited by XLR8